As an Amazon Associate, we earn from qualifying purchases. This post contains affiliate links – if you buy through them, we may earn a commission at no extra cost to you.
There’s no single best portable welder for thick steel. The right one comes down to three things about you: where you’ll weld, how thick the metal really is, and whether you want gas or gasless. These machines differ in what they run on, what they include, and how much steel they claim to handle — that’s what separates them, not a ranking. Most buyers split between the YESWELDER 135A MIG Welder for simple gasless work and the BESTMIG 145A 4-in-1 for dual voltage and a fuller kit.
1. YESWELDER 135A MIG Welder
Best for: someone welding thin auto body panels and light steel at home.
This machine runs on 110V and puts out 135A, which the listing says handles mild steel up to 3/32″ (2.5mm). That’s not thick steel in the structural sense — a 2.5mm ceiling means plate steel and heavy farm repairs sit outside what it claims. Where it earns its place is control: the Synergic Control matches voltage to your wire feed speed automatically, and the ±3V micro-adjustment lets you fine-tune from there.
The gasless flux core setup means no shielding gas cylinder, so you can work outdoors in wind. It ships with E71T-GS.030″ and.035″ flux core wire. At 11.4 lbs with a carry handle, it moves around a shop or garage without a cart.
The trade-off: 110V input and a 3/32″ ceiling make this a light-steel machine.
Good if:
- You’re welding car panels, thin sheet, or light brackets at home
- You want to work outdoors without hauling a gas cylinder
- You’re new to MIG and want the machine to set voltage for you
Skip it if:
- You need to weld plate or structural steel beyond 3/32″
- You want TIG out of the box without buying another torch
2. ARCCAPTAIN 135A Flux Core MIG Welder 110V 3-in-1 Gasless MIG
Best for: a beginner who wants the machine to do the thinking on setup.
The listing says you only need to know your wire size and metal thickness. Set those, and the wire feed speed and voltage match automatically to a recommended value. For a first-time welder, that removes the step where most first welds go wrong. Experienced welders get manual wire feed control, voltage fine-tuning between -1V and 1V, and 2T or 4T trigger modes.
On Stick, you can set Hot Start and Arc Force from 0A to 60A. It runs on 110V at 135A, handles carbon and stainless steel, and weighs 9.48 lbs with a shoulder strap.
Good if:
- You want automatic parameter matching as a first-time MIG user
- You’ll switch between flux core MIG and Stick on the same jobs
- You want something light enough to carry on a strap
Skip it if:
- You need a published thickness figure to plan a specific job
- You want TIG included without buying a separate torch
3. BESTMIG 145A 4-in-1 Multi-Process Welder
Best for: someone who wants one machine for home, workshop and on-the-go repairs.
This is the pick with the most reach on paper. It runs on 110V or 220V and combines gas and gasless MIG, Stick and Lift TIG. It handles mild steel up to 3mm (2/5″) thick. It takes solid steel and stainless wire from.030″ to.03″ diameter, and flux-cored wire from.030″ to.040″.
The kit includes a welding machine, ground clamp, electrode holder, 120V-240V power adapter cable, MIG torch, 0.8mm flux-cored wire, 0.8mm solid wire, welding gloves, auto-darkening helmet, contact tip, gas tube with connector, brush and hammer set, strap, and V&W(K)-shaped feed wheels installed.
Good if:
- You want 220V capability for heavier work and 110V for ordinary outlets
- You want a helmet and gloves in the box, not bought after
- You’ll weld stainless as well as carbon steel
Skip it if:
- You only ever weld thin sheet and don’t need dual voltage
- You want TIG without buying a torch separately
4. DEKOPRO 160A ARC Welder
Best for: someone who wants a simple stick machine for repair work.
This is a different animal from the MIG machines above. It’s a 110/220V MMA stick welder at 160A on IGBT inverter technology, and the listing says it welds mild steel, stainless steel and aluminum. The listing gives this machine a 160A output and dual voltage input.
It carries an ETL certificate, with built-in anti-stick, hot start and arc stability. Closed-loop feedback control keeps output voltage stable on a variable power network.
What it doesn’t have is MIG or TIG — no wire feed, no spool, no flux core. It comes with an electrode holder, work clamp, input power adapter cable and brush. That’s the limit: it’s a stick machine, and stick takes more practice than flux core MIG.
Good if:
- You want stick welding for repair work on thicker steel
- You want dual voltage in a compact machine
- You prefer a machine with no wire feed to set up or jam
Skip it if:
- You want MIG or TIG capability
- You’re a total beginner who wants the machine to set parameters for you
5. ReadyWelder by Broco Portable Welding Machine
Best for: someone welding off-grid where there’s no outlet at all.
This one solves a problem the others can’t touch. It runs off two car batteries, so it works with no outlet — remote sites, farm fields, trail repairs. Batteries aren’t included, so you supply those yourself.
The trade-offs are real and stated: you need two car batteries, and this is a machine built around mobility. If you have an outlet, the other picks here are simpler to live with.
Good if:
- You weld where there’s no power outlet within reach
- You do farm, marine or off-road repair work
- You already have batteries and a gas setup
Skip it if:
- You have a normal outlet and weld in one place
- You don’t want to supply batteries and shielding gas yourself
Where These Overlap
The YESWELDER 135A and ARCCAPTAIN 135A are close enough that the choice barely matters on the numbers. Both are 110V, both are 135A, both do gasless flux core MIG, Stick and Lift TIG with a torch bought separately, and both have automatic parameter matching. What separates them is the published thickness ceiling — YESWELDER states 3/32″ (2.5mm), ARCCAPTAIN states no figure — and the weight, 11.4 lbs against 9.48 lbs.
Still Not Sure?
How often will I actually weld thick steel?
If it’s occasional repair work, a 110V flux core machine like the YESWELDER 135A MIG Welder covers light steel well. If thick plate is the regular job, the BESTMIG 145A 4-in-1 with 220V capability fits that pattern better.
What do I already own that this has to work with?
If you have a 220V outlet or generator, the BESTMIG 145A 4-in-1 uses it. If you only have ordinary household outlets, the ARCCAPTAIN 135A MIG Welder runs on 110V and matches parameters for you. If you have neither, the ReadyWelder Broco Portable runs off car batteries.
What am I most likely to regret?
Buying a machine whose stated thickness ceiling is below your real work. Check the number before you commit. The BESTMIG 145A 4-in-1 states 3mm, the YESWELDER 135A MIG Welder states 3/32″ (2.5mm), and the DEKOPRO 160A ARC Welder states no thickness figure at all for stick work.
Also Worth Considering
The SEESII MIG Welder is a 135A, 110V three-in-one doing gasless flux core, Lift TIG and Stick, at 7.7 lbs with a large digital display and IGBT inverter.
If you weld thin steel at home with no gas cylinder, the YESWELDER 135A MIG Welder is the straightforward pick. If you want the flexibility of a higher-voltage input and a full kit in one box, look at the BESTMIG 145A. Check your thickest job against the stated thickness first, then open the listing for today’s details.
Frequently Asked Questions
Can a 110V portable welder handle thick steel?
Mostly no, not in the structural sense. The YESWELDER 135A MIG Welder states mild steel up to 3/32″ (2.5mm), and the BESTMIG 145A 4-in-1 states up to 3mm — and that one also offers 220V input for heavier work.
Do I need shielding gas for a portable MIG welder?
Not always. The YESWELDER 135A MIG Welder, the ARCCAPTAIN 135A MIG Welder and the BESTMIG 145A 4-in-1 all run gasless flux core, which is why they work outdoors in wind. The ReadyWelder Broco Portable is a gas MIG welder, so it needs shielding gas. The DEKOPRO 160A ARC Welder uses stick electrodes and needs no gas at all.
What’s the difference between MIG and stick for thick steel?
MIG with flux core wire, like the YESWELDER 135A MIG Welder, is easier to learn and better on thinner metal. Which one suits you depends on the thickness you actually weld.
Do these welders include everything I need to start?
No. The BESTMIG 145A includes a helmet, gloves, wire and a power adapter cable, and the YESWELDER 135A MIG Welder includes flux core wire. For Lift TIG on the YESWELDER, ARCCAPTAIN and BESTMIG units, you need to buy a TIG torch separately.
Conclusion
Before you buy, measure the thickest steel you’ll actually weld and check what outlet you’ll plug into. If you’re still torn, grab the YESWELDER for simple gasless jobs or the BESTMIG if you want dual voltage and a fuller kit. Either way, you’ll be welding within an hour.

Hi, I’m Zachary Ford. I’m passionate about welding and dedicated to helping both beginners and experienced welders make informed decisions. I research, test, and write about welding helmets, welding machines, safety equipment, and essential workshop tools. My goal is to provide honest reviews, practical buying guides, and easy-to-follow tutorials that help you weld more safely, work more efficiently, and choose the right gear with confidence.





