As an Amazon Associate, we earn from qualifying purchases. This post contains affiliate links – if you buy through them, we may earn a commission at no extra cost to you.
There’s no single best portable welder for RV work. The right one depends on three things about you: what you’ll actually weld (thin body panels, brackets, or a hitch repair), whether you have 110V only or can find 220V at a campground pedestal, and how much you value a machine that does one job well over one that does three. These machines differ in process, weight, and power ceiling, not in quality tiers. Most buyers split between the YESWELDER 135A MIG for its 3-in-1 flexibility and the Hpoouo 200A Stick for its 3.7 lb backpack size.
1. YESWELDER 135A MIG Welder
Best for: RV owners who want one machine for several jobs
An RV owner welding on the road faces two problems at once. You need a process that works outdoors without a shielding gas cylinder, and you need control fine enough for thin auto body panels. This machine’s listing addresses both. It runs gasless flux core MIG, so wind at a campsite won’t ruin your weld the way it would with gas-shielded MIG.
The listing states Synergic Control matches voltage to wire feed speed automatically, with a ±3V micro-adjustment. At 11.4 lbs with a handle, it’s easy to move around a site.
Good if:
- You want flux core MIG, Stick, and Lift TIG from one box
- You mostly weld thin steel and want help setting voltage
- You weld outdoors where wind rules out shielding gas
Skip it if:
- You need to weld steel thicker than 3/32″ (2.5mm)
- You want TIG included without buying a torch separately
2. YESWELDER 205Amp Stick Welder Digital Inverter IGBT ARC Welding Machine
Best for: RV owners who need real power for thick metal
Stick welding on an RV usually means one of two jobs: a hitch repair or a bracket that has to hold. Both demand penetration, and penetration comes from amperage. This machine’s listing states up to 205 amps, which is the highest figure among these picks.
Good if:
- You need to weld thick steel, not sheet metal
- You want the option of 220V for more output
- You already know, or want to learn, stick technique
Skip it if:
- You want to weld thin body panels
- You want a wire-feed process instead of rods
3. ARCCAPTAIN 135A Flux Core MIG Welder 110V 3-in-1 Gasless MIG
Best for: First-time buyers who want the machine to set itself
A beginner’s real fear with a MIG welder is the settings. Get voltage or wire speed wrong and you either burn through or get no penetration. This listing speaks directly to that. It says you only need to enter your wire size and the metal thickness you want to weld, and the wire feeding speed and voltage are then matched to a recommended value automatically.
The listing also describes manual control: free wire feed adjustment, voltage fine-tuning between -1V and 1V, and “2T” or “4T” trigger modes. On Stick, Hot Start and Arc Force adjust from 0A to 60A.
The listing claims up to 30% better arc starts and 20% higher efficiency. At 9.48 lbs it includes both a handle and a shoulder strap.
Good if:
- You’re new to MIG and want automatic setup
- You want a shoulder strap for carrying between sites
- You want fine voltage control once you’ve learned
Skip it if:
- You want TIG without buying a torch separately
- You need more than 135A for thick steel
4. Hpoouo 200Amp 20PCS Rods Stick Welder
Best for: RV travelers with almost no storage space
This machine’s listing gives its size as 7.8 x 3.9 x 5.3 inches and its weight as 3.7 lbs, and the listing says it fits in a backpack or toolbox.
The listing states adjustable current from 20-200A and metal from 0.06 to 0.2 inch thick. It lists Hot Start, anti-stick, and arc force functions, plus over-voltage, over-current, over-heating, and overload protection.
Two details in the listing deserve attention. First, it says the included rods are acidic, so the electrode holder and earth clamp connect to the “+” and “-” terminals respectively — and that alkaline rods need the opposite connection.
Good if:
- Storage space is your tightest constraint
- You want rods, gloves, and a chipping hammer in the box
- You’ll weld a mix of cast iron, mild steel, and stainless
Skip it if:
- You want a wire-feed process instead of stick
- You won’t check rod type and polarity before welding
5. TOOLIOM 135A 110V Mini Stick Welder
Best for: Beginners who want a single simple, safe machine
The most useful thing in this listing is a warning, not a feature. It states in capitals that the welder is for 110V input only, and that connecting it to 220V will cause immediate damage and fire risk. If you own an RV with a 220V outlet or a generator that can output 220V, that warning is the single most important line on the page. It also makes this the pick for someone who only ever plugs into a standard household outlet.
The listing describes a 2-in-1 machine for Stick or Lift TIG, running 6011 and 6013 electrodes on an IGBT inverter. It names mild steel, cast iron, stainless steel, and hard surfacing as suitable work. Anti-stick, arc force, and hot start are all listed as built in, and the listing calls it easy to operate and safe for a beginner.
Good if:
- You want a machine locked to 110V for safety
- You’re new to stick and want simple controls
- You want a shoulder strap for site-to-site carrying
Skip it if:
- You want to run 220V for more output
- You need a wire-feed process for thin panels
What to Look for in a Portable Welder for RV Use
The two 135A MIG machines — YESWELDER and ARCCAPTAIN — are close enough that picking between them barely matters. Both are 110V, both run gasless flux core MIG with Stick and Lift TIG, both need a torch bought separately for TIG, and both are compact and portable. The deciding factor is the setup style: YESWELDER lists Synergic Control with fine voltage adjustment, ARCCAPTAIN lists automatic matching from wire size and thickness plus fine-tuning. Pick the one whose control description matches how you like to work.
Still Not Sure?
How often will I really use a welder on my RV?
If it’s a repair tool for a few jobs a year, the Hpoouo 200A Stick’s 3.7 lb size makes it easy to keep in the rig. If you’ll weld often and want a wire-feed process, look at the YESWELDER 135A MIG instead.
What power can I actually get at my campsite or storage spot?
Most campsite pedestals and household outlets give you 110V, which every machine here runs on. Only the YESWELDER 205A Stick also lists 220V support. The TOOLIOM 135A Stick warns that 220V will damage it immediately, so check your outlet first.
What am I most likely to regret?
Buying more machine than your power or your skill supports. Stick welding is a learned skill, and the YESWELDER 205A Stick’s 205 amps won’t help if you can’t run a bead. If you want the machine to help you set up, the ARCCAPTAIN 135A MIG matches settings for you.
Frequently Asked Questions
Can I run a portable welder for RV use on a standard 110V outlet?
Yes. Every machine here lists 110V input. The YESWELDER 205A Stick also supports 220V for more output. The TOOLIOM 135A Stick is 110V only, and its listing warns that 220V will damage it and create a fire risk, so verify your outlet before plugging in.
What thickness of metal can a 110V portable welder handle?
It varies by machine and process. The YESWELDER 135A MIG lists mild steel up to 3/32″ (2.5mm). The Hpoouo 200A Stick lists 0.06 to 0.2 inch. The ARCCAPTAIN 135A MIG and TOOLIOM 135A Stick listings don’t mention a thickness figure.
Do I need to buy anything extra to use these welders?
For MIG and Stick, no — the YESWELDER 135A MIG includes flux core wire, and the Hpoouo 200A Stick includes 20 rods, gloves, and chip hammers. For Lift TIG, yes. The YESWELDER 135A MIG, ARCCAPTAIN 135A MIG, and TOOLIOM 135A Stick all state the Lift TIG torch isn’t included.
Which welding rods work with these stick welders?
The Hpoouo 200A Stick lists E6013, E6011, E6010, E7018, and E308 at 1/16″ to 1/8″, and notes stainless needs E308L-16 rods only. The YESWELDER 205A Stick lists 6010, 6011, 6013, and 7018. The TOOLIOM 135A Stick lists 6011 and 6013.
Conclusion
If you want a single machine for several processes and mostly weld thin steel, the YESWELDER 135A MIG is your pick. If you need to weld thick metal and want the option of 220V, the YESWELDER 205A Stick is your pick. Check your outlet and your storage space before you buy.

Hi, I’m Zachary Ford. I’m passionate about welding and dedicated to helping both beginners and experienced welders make informed decisions. I research, test, and write about welding helmets, welding machines, safety equipment, and essential workshop tools. My goal is to provide honest reviews, practical buying guides, and easy-to-follow tutorials that help you weld more safely, work more efficiently, and choose the right gear with confidence.





